casting crack
英 [ˈkɑːstɪŋ kræk]
美 [ˈkæstɪŋ kræk]
铸件缩裂
双语例句
- Appearance and preventing measures for big blank cap casting crack at Ore-dressing Plant
选矿厂大端盖铸造裂纹的产生及预防 - Removing of Casting Crack on Hub with RE
加入稀土消除铸造轮毂的裂纹 - Because of strengthening rib is not to simultaneous coagulating with thin wall position of casting steel piece, the strengthening rib root of reducer case made from casting steel is easily to produce hot crack.
铸钢减速机壳体加强筋根部易产生热裂纹，其原因是加强筋与薄壁处不能同时凝固。 - An available chamber design is presented to prevent squeezing casting from creation of shrinkage crack and shrinkage hole as well as to elevate specific pressure.
为防止挤压铸造铸件缩裂、缩孔产生和提高铸造比压，推荐一种合理料缸（压室）设计。 - The casting fluidity, ratio of line contraction, casting stress and heat crack tendency were tested. The factors of influence casting properties were also analyzed.
测试了Al3Ti/ZL101原位复合材料的流动性、线收缩率、热裂倾向及铸造应力，分析了影响铸造性能的各种因素。 - The surface temperature model of the casting without surface crack is obtained as follows: the surface temperature decreases slowly and is corrected over 900 degrees, the upper temperature limit in lower plasticity temperature zone.
得到无表面裂纹的铸坯表面温度模型为：表面温度为缓慢下降过程，并在低塑性温区的上限温度900℃进行矫直。 - The methods about controlling alloy components and increasing melt purity were presented. The methods of preventing casting crack were presented.
提出了控制合金成分、提高金属纯洁度的方法，重点提出了解决扁铸锭裂纹的措施。 - Basic Study on Large Size Cement Concrete Structure Casting Temperature Crack Prevention and Control
大体积水泥混凝土结构浇注施工温度裂缝防控初探 - Massive concrete structure is the important structure form of water conservancy project, however, concrete material can resist huge pressure but small tensile stress and causes large amount of heat after casting, which result in the destructive crack of structure easily.
大体积混凝土结构是水利工程的重要结构形式，然而，由于混凝土材料耐压不耐拉、浇筑后产生大量热量等特点，致使结构容易产生破坏性裂缝。 - Effect of Pouring Temperature on Investment Casting Crack
浇注温度与熔模铸件裂纹